How to attach a drawer front and adjust

DIY Kitchens

9 years ago

The following guide will show you how to attach a drawer front to your kitchen units, as well as show you how to adjust them.

Drawer front clips

Please note that the drawer front clips are already located into the drawer sides for transportation reasons.

Using a screw driver, turn the centre screw A to unlock the front brackets from the connection plates within the box

Drawer fixing

Drill 4 pilot holes for drawer front clips in positions shown on the rear of drawer front (below). Screw fix drawer front clips to rear of drawer front

To connect the drawer front to the drawer box simply align the brackets on the drawer front with the drawer box and push onto box until it clicks into place. After adjustment, clip the cover caps into place over the adjustment ‘windows’ on each side of the box.

To remove the drawer front from the box. Use a screw driver and turn the centre screw A to unlock the front brackets from the connection plates within the box.

Drawer adjustment

Remove cover caps from each side of the drawer box to expose the drawer adjustment screws. The cap simply clips into the drawer adjustment ‘window’. Adjustment screws B and C for drawer box adjustment.

Vertical Adjustment – Turn rear adjustment screw B to give vertical adjustment to drawer box.

Horizontal Adjustment – Turn rear adjuster screw C to give horizontal adjustment to drawer box.

Download our mobile app

Looking for some kitchen inspiration? Take a look at some of our real customer kitchens, video reviews as well as advice in our mobile app. We’ll also keep you up to date with any new ranges and offers that we have available.

Up to 50% off competitor kitchen prices

At DIY Kitchens, not only do you get a quality rigid built kitchen but you also get it at a fabulous price too! Price your kitchen up on our site and you could see savings of up to 50% off other kitchen quotes that you’ve had.

Take a look at our kitchen price comparison page here.